Laying back a tape – Sony DCR-TRV10 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
’laying back a tape
‘ i
y I y. \\
• > 11 ■,
To operate control buttons, set the POWER switch to VTR.
To view a still picture (playback pause)
Press II durmg playback. To resume playback, press II or ►.
To advance the tape
Press
in the stop mode. To resume normal playback, press
BH
To rewind the tape
^
Press
in the stop mode. To resume normal playback, press ►.
'§■
To change the playback direction
7
Press < on the Remote Commander during playback to reverse the playback direction. Ç
To resume normal playback, press ► .
g'
To locate a scene monitoring the picture (picture search)
Keep pressing or ►► during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing or
rewinding the tape (skip scan)
Keep pressing while rewinding or ►► while advancing the tape. To resume
rewinding or advancing, release the button.
To view the picture at slow speed (slow playback)
Press !► on the Remote Commander during playback. For slow playback in the reverse
direction, press <, then press !► on the Remote Commander. To resume normal
playback, press
To view the picture at double speed
Press x2 on the Remote Commander during playback. For double speed playback in the
reverse direction, press <, then press x2 on the Remote Commander. To resume
normal playback, press ►.
To view the picture frame-by-frame
Press !!► on the Remote Commander in the playback pause mode. For frame-by-frame
playback in the reverse direction, press ^M. To resume normal playback, press ►.
To search the last scene recorded (END SEARCH)
Press END SEARCH in the stop mode. The last
5 seconds of the recorded section plays back and stops.
End Search
'
When you use a tape without cassette memory, the end search function does not work
once you eject the cassette after you have recorded on the tape.
^
When you use a tape with cassette memory, the end search function works even once
you eject the cassette.
In the various playback modes
Sound is muted.
When the playback pause mode fasts for S minutes
Your camcorder automatically enters the stop mode. To resume playback, press ►.
Slow playback
The slow playback can be performed smoothly on your camcorder; however, this
function does not work for an output signal from the g DVIN/OUT jack.
When you play back a tape in reverse
Horizontal noise appears at the center or top and bottom of the screen. This is not a
27
malfunction.
- .
-