Using a video camera, Using with external devices, Gonnectioris'and settings' 7» ? 1 – Sony DCR-TRV10 User Manual
Page 151
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using with External Devices
ii rJÍJU« *‘»l! Hi
_____________^______ • *
This part describes PictureGear operation when connected with external
devices. See the PictureGear on-line help and the device manuals for more
details.
Using a Video Camera
With a Sony video camera connected to the PC, PictureGear lets you transí«
images between the PC and the camera.
Note
The video camera described here refers to the device with which the software was
bundled (or with the devices for which the accessory kit bundle is intended). Other
devices are not compatible.
Gonnectioris'and Settings'
7»
?
1
Turn off the video camera and PC power.
2
Connect one end of the connection cable to a PC serial port, ar
the other end to the DIGITAL I/O jack on the video camera.
3
Turn on the video camera, and set it to communicate with the
(set the power switch to "Video", etc.).
Refer to the video camera operating manual for details.
4
Turn on the PC and run PictureGear.
5
In the Setup menu, point to Connection with Other Device, am
click Video Camera.