Ewing the recording on tv, S video audio/video – Sony DCR-TRV10 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ewing the recording on TV
Connect your camcorder to your TV or VCR with the A/V cormectmg cable supplied
with your camcorder to watch the playback picture on the TV screen. You can operate
the playback control buttons in the same way as when you monitor playback pictures
on tt\e LCD screen. When monitoring the playback picture on the TV screen, we
reconunend that you power your camcorder from a wall outlet using the AC power
adaptor (p. 13). Refer to the operating irwtructions of your TV or VCR.
Open the jack cover. Connect your camcorder to the TV using the A/V connecting
cable. Then, set the TV/VCR selector on the TV to VCR.
S VIDEO
AUDIO/VIDEO
Coimect your camcorder to the LINE IN input on the VCR by using the A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.
Cormect the yellow plug of the A/V connecting cable to the video input jack and the
white or die red plug to the audio input jack on the VCR or the TV. If you connect the
white plug, the sound is L (left) signal. If you connect the red plug, the sound is R
(right) signal.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures. With this
connection, you do not need to connect the yellow (video) plug of the A/V connecting
cable.
Coimect the S video cable (not supplied) to the S video jacks on both your camcorder
and the TV or the VCR.
Refer to the operating instructions of your TV.
This connection produces higher quality DV format pictures.