Editing pamaiiy on a uv, Dv synchro-editing (dcr-trv10 only) – Sony DCR-TRV10 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing pamaiiy on a uv
-
DV synchro-editing (DCR-TRV10 only)
By simply selecting the scenes to edit, you can duplicate the desired portion on a tape,
using other equipment connected with an i.LINK cable (DV connecting cable). The
scenes can be selected by frame. Since your camconier exchanges digital signals, you
can edit with little audio and video deterioration.
You cannot duplicate titles, display indicators, or the contents of cassette memory.
The connection is the same as on page 55.
(1)
Insert a recorded tape into your camcorder and insert a blank tape (or a tape
you want to record over) into the DV product.
(2)
Set the POWER switch of your camcorder to VTR.
(3)
Set the input selector to DV input on the DV product. If the DV product is
another DV camcorder, set its POWER switch to VTR.
(4)
Press MENU to display the menu.
(5)
Turn the SEL/PUSH EXEC dial to select
S,
then press the dial.
(6)
Turn the SEL/PUSH EXEC dial to select DV EDITING, then press the dial.
(7)
Using
the
video
control
bjuttons,
locate
the
point
where
you
want
to
start
editing,
then
press
II
to
set
your
camcorder
in
the
playback
pause
mode
(p. 130).
(
8
)
Press
the
SEL/PUSH
EXEC
dial
or
MARK
on
the
Remote
Commander
to
set
DV EDITING IN.
(9)
Using
the
video
control
buttons,
locate
the
point
where
you
want
to
end
editing, then press II to set your camcorder in the playback pause mode.
(10)
Press
the
SEL/PUSH
EXEC
dial
or
MARK
on
the
Remote
Commander
to
set
DV
EDITING
OUT.
The
editing
process
starts.
When
the
process
ends,
your
camcorder and the DV product automatically set to pause mode.