Precautions for use, About the o^emfrt^ eriyfrdm, About – Sony DCR-TRV10 User Manual
Page 141: About using with windows nt4.0
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Precautions for Use
About the O^eMfrt^ Eriyfrdm
The hardware and software requirements for using PictureGear are as
follows:
O IBM PC/AT or compatible with the following capabilities.
-
Minimum 90 MHz Pentium CPU (166 MHz or faster recommended)
-
Minimum 32 MB,main memory (64 MB or more recommended)
-
Minimum 30 MB available hard disk space (for Standard installation
-
Minimum 640 x 480 pixel Hi Color (16-bit color) display driver
capability.
□ Operating System
Microsoft Windows 95, 98 or NT4.0.
About Using with Windows NT4.0
• PictureGear must be installed with a supervisory-level login user name,
such as "Administrator".
• PictureGear may require about 150 MB of real and virtual memory
combined. If PictureGear is nm under Windows NT4.0 with too little
memory, a message such as "Your system is running low on virtual
memory. Please close some applications." may appear. In this case, close
PictureGear immediately, login with a supervisory level user name, doul_
click the System icon in the Control Panel and increase the maximum siz>
of virtual memory with the Performance setting.
Note
To view movies with PictureGear Version 3.2 Lite, the Microsoft DirectX Media
Runtime Version 5.2 (or later) movie support library is required. If no movie support
library is present, it can be installed from the PictureGear CD-ROM. See page 10 for
details.
About <
When
using
PictureGear,
the
color
palette
of
the
screen
should
be
at
least
Hi Color (16-bit color) for proper display.
The
display
color
settings
are
made
by
double
clicking
the
Display
icon
i:
the Windows Control Panel.