To stop copying, When the memory of the memory stick is full, When the access lamp is lit or flashing – Sony DCR-TRV10 User Manual
Page 92
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To stop copying
Press MENU to stop copying.
When the memory of the Memory Stick is full
"MEMORY FULL" appears on the LCD screen, anti the copying stops. Insert another
Memory Stick anti repeat the procedure from step 2.
Copying still images from a mini DV tape - Photo save
When the ACCESS lamp is lit or flashing
Never shake or strike your camcorder. As well do not turn the power off, eject a
Memory Stick or remove the battery pack. Otherwise, the image data breakdown may
occur.
To record ail the images recorded on the mini DV tape
Rewind the tape all thp way back and start copying.
If the write-protect tab on the Memory Stick is set to LOCK
"NOT READY" appears when you select the item in the MENU settings.
When you change Memory Sticks in the middle of copying
Your comcorder resumes copying from the last image recorded on the previous
Memory Stick.