Labeling a cassette, To erase a character, To change the label you have made – Sony DCR-TRV10 User Manual
Page 72: If you have superimposed titles in the cassette, When the " " indicator has fewer than 10 spaces
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i
Labeling a cassette
To erase a character
In step 6 turn the SEL/PUSH EXEC dial to select then press the dial. The last
character is erased.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If you use a cassette set to prevent accidental erasure
You cannot label it. Slide the write-protect tab ^ that the red portion is not visible.
If the mark appears in step 5
The cassette memory is full. If you erase the title in the cassette, you can label it.
If you have superimposed titles in the cassette
When the label is displayed, up to 4 titles also appear.
When the "-----" indicator has fewer than 10 spaces
The cassette memory is full.
Tire "------" indicates the number of characters vou can select for the label.
m
71