Ecording a picture, Recording a picture – Sony DCR-TRV10 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording - Basics —
ecording a picture
Your camcorder automatically focuses for you.
(
1
)
Remove the lens cap by pressing bottt knobs on its sides and attatch the lens
cap to the grip strap.
(
2
)
Install the power source and insert a cassette. See "Step 1" and "Step 2" for
more information (p. 9 to p. 14).
(3)
Set the POWER switch to CAMERA while pressing the small green button.
Your CiUncorder is set to the standby mode.
(4)
Slide OPEN in the direction of the ► mark. Then, open the LCD panel. The
viewfinder automatically turns off.
(5)
Press
START/STOP.
Your
camcorder
starts
recording.
The
"REC"
indicator
appears.
The
caniera
recording
lamp
located
on
the
front
of
your
camcorder
lights up. To stop recording, press START/STOP again.
<Q
I
Camera recording
lamp