Notes, To extend the recording time in the 5sec mode, Cassette memory indicator – Sony DCR-TRV10 User Manual
Page 20: Recording mode indicator • stby/rec indicator, Time code/tape counter, Remaining tape indicator, Remaining battery time indicator, Time code, Recording a picture
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording a picture
A:
Recording starts when you press START/STOP, and stops when you press it
again (factory setting).
ANTI GROUND SHOOTING
±.:
Your camcorder records otUy while you press START/STOP. Use this mode to
avoid recorditrg unnecessary scenes.
5SEC: When you press use this mode to START/STOP, your camcorder records for 5
seconds and then stops automatically.
¿.-.A.------------5SEC
START/STOP
MODE
D
ANTI GROUND
SHOOTING
Notes
• You cannot use the fader function in the 5SEC or mode.
• The time code does not appear in the 5SEC mode.
To extend the recording time in the 5SEC mode
Five
dots
(99#9#)
appccir,
emd
then
disappear
at
a
rate
of
one
per
second.
To
extend
the
recording
time,
press
START/STOP
again
before
all
the
dots
disappear.
Recording
continues for about 5 seconds from the moment you press START/STOP.
The indicators are not recorded on tape.
' Cassette memory indicator
This appears when using a tape with cassette memory.
Recording mode indicator
• STBY/REC indicator
■ Time code/Tape counter
Remaining tape indicator
This
appears
after
you
insert
a
cassette
and
record
or
play
back for a while.
Remaining battery time indicator
20
Time code
The
time
code
indicates
the
recording
or
playback
time,
"0:00:00"
(hours
:
minutes
:
seconds)
in
CAMERA
mode
and
"0:00:00:00"
(hours
:
minutes:
seconds
:
frames)
in
VTR mode. You cannot rewrite only the time code.
Your camcorder uses the drop frame mode.
Remaining tape indicator
The indicator may not be displayed accurately depending on the tape.