Selecting image guality mode – Sony DCR-TRV10 User Manual
Page 82
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Using a Memory Stick-introduction
Selecting image guality mode
You can select image quality mode in still picture recording. If you do not make anv
selection, the unit automatically records in FINE mode.
(1)
Set the POWER switch to MEMORY. Make sure that the lock is set to the left
(unlock) position.
(
2
) Press MENU to make the MENU display appear.
(3)
Turn the SEL/PUSH EXEC dial to select Q, then press the dial.
(4)
Turn the SEL/PUSH EXEC dial to select QUALITY, then press the dial.
(5)
Turn the SEL/PUSH EXEC dial to select the desired image quality, then press
the dial,
(6)
Press MENU to erase the menu display.
Advertising
This manual is related to the following products: