Ing the program ae function, To turn the program ae function off, Notes – Sony DCR-TRV10 User Manual
Page 43: While wht bal is set to auto in the menu settings, Even if the program ae function is selected
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ing the PROGRAM AE function
(1)
Press PRCX5RAM AE in the standby mode. The PROGRAM AE indicator
appears.
(2)
Turn the SEL/PUSH EXEC dial to select the desired PROGRAM AE mode.
The indicator changes as follows:
@ <—►
Sgi
<—► 'jf <—►
T'
<—► #
*—*
QD ■*—► 8
1
mi
'Mg;
>
O.
<
0)
o
“T
a
5‘
«fi
O
To turn the PROGRAM AE function off
Press PROGRAM AE.
Notes
• In the spotlight, sports lesson and beach & ski modes, you cannot take close-ups. This
is because your camcorder is set to focus only on subjects in the middle to far distance.
• In the surrset & moon and landscape modes, your camcorder is set to focus only on
distant subjects.
• The following functions do not work in the PROGRAM AE mode;
-Slow shutter
-Old movie
-Bounce
• The following functions do not work in the low lux mode:
- Digital effect
>
t
-Overlap
• If you press PROGRAM AE when using the NightShot function, the PROGRAM AE
indicator flashes and the PROGRAM AE function does not work.
While WHT BAL is set to AUTO in the MENU settings
The white balance is adjusted even if the PROGRAM AE function is selected.
Even if the PROGRAM AE function is selected
You can adjust the exposure.
If you are recording under a discharge tube such as a fluorescent lamp, sodium
lamp or mercury lamp
Flickering or changes in color may occur in the following modes. If this happens, turn
the PROGRAM AE fimction off.
- Soft portrait mode
-Sports lesson mode
43