Stroboscopic flash – Canon 430 EZ User Manual
Page 101
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Stroboscopic Flash
When manual flash Is used, It is possible to shoot
continuous motion for a flowing effect In the photo.
Set the flash intensity within the range of 1/4 to 1/32,
and then select the value from one to ten for the
number of flashes per second.
The relation between the flash intensity and the
number of flashes per second is shown in the chart
below.
Be sure to use new or freshly charged batteries
• The stroboscopic flash stops after twenty consecutive
flashes
• This function cannot be done with the EOS 750 or 850
1.
Set the camera to “M" (manual mode). Set the
desired aperture and shutter speed. (T) @
• The shooting distance increases as the aperture
opens
• Set the shutter speed to cover all the subject's motion,
2.
Press the mode button so [MULTI 1Hz] and "M
1/16" appear in the display panel to indicate the
57