Basic operation – Canon 430 EZ User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operation
Follow these steps for regular flash photos. These
settings will correspond to illumination conditions
ranging from total darkness to fill-in lighting.
1.
Set the camera's main switch to the full auto
position. This is the green □ mark on the EOS
620, 630 and 650 and PROGRAM on the selector
dial for the EOS 750 and 850. (T)
•When the EOS-1 is used, set the shooting mode
to "Program" and the flash to ATTL.
2.
Cover the main subject with the AF frame and
press the shutter button halfway,
• The infrared light emits from the flash to determine the
appropriate aperture value
• The X-sync shutter speed is automatically set from 1/60
sec. to 1/250 sec for the EOS-1 and 620 For the 630,
650, 750, and 850, 1/60 sec to 1/125 sec
3.
Press the shutter button completely if the shutter
speed, aperture value, and “V’ mark are not blink
ing. If these displays blink, check the exposure
warnings. @
27