Se (save energy) function – Canon 430 EZ User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SE (Save Energy) Function
The 430EZ has a Save-Energy (SE) function that
automatically turns off the power when the flash is
not used for approximately 90 seconds. (J)
Press the shutter button halfway to recharge the flash.
• A small current flows when the SE function
operates.
Turn the main switch OFF (“O’mark)
when finished to prevent unnecessary battery
consumption.
• When the Technical Back E Is used for interval or
self-timer photography, the flash’s power supply
turns ON automatically one minute before the set
operation.
21
Advertising