Film speed setting, Display panel illumination, Af auxiliary light – Canon 430 EZ User Manual
Page 40: Mode memory function, Film speed setting display panel illumination
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Film Speed Setting
The film speed is set automatically by the camera.
Display Panel Illumination
Press the light button to illuminate the display panel
for approximately eight seconds in dark conditions.
If the light button is pressed again during the initial
illumination, the panel glows another ei^t seconds
from the time the button is pressed. Q)
AF Auxiliary Light
In dark settings that are difficult for autofocusing, the
AF auxiliary light automatically emits to facilitate
focus. The effective distance range is approximately
3 to 32.8 ft. (0.9 -10 m.) If the subject is too far away,
the AF in-focus indicator blinks. Move closer to the
subject @
Mode Memory Function
This function automatically memorizes the mode and
set value before the flash is turned off. This eliminates
the need for resetting.
25