Batteries – Canon 430 EZ User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Batteries
• Use four new, size-AA alkaline (LR6) batteries.
When the batteries are dead, replace them all at the
same time with the same brand.
• When using Ni-Cd batteries, please note that various
brands have different types of terminals. Be sure to
use a suitable type. Recharge Ni-Cd batteries accor
ding to the manufacturer’s instructions.
Carbon-zinc batteries may also be used, but their life
is shorter.
• Remove the batteries if you do not expect to use
the flash unit for about three weeks or longer.
• Battery performance deteriorates in cold temperatures
below 0°C/32°F. Keep the batteries warm until just
before use. For best results, use fully-charged Ni-Cd
batteries in cold temperatures below 0°/32°F.
• Wipe the battery terminals with a clean, dry cloth to
ensure proper contact because correct electrical con
tact is not possible if the contact surface is dirty. (See
handling precautions #7)
15