Mounting the flash, Ready lamp and test firing – Canon 430 EZ User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting the Flash
1.
Loosen the lock nut and slide the flash unit into
the camera's accessory shoe. To ensure correct
electrical contact, make sure it is pushed in all the
way. (T)
2.
Tighten the lock nut by turning it clockwise. @
The EOS-1 and 630 have a tiny hole on the accessory
shoe. This hole requires that the flash be securely
fastened for proper operation.
Ready Lamp and Test Firing
1. When the main switch is turned ON (“I” mark)
the flash begins charging. Charging is completed
when the ready lamp glows. The “V mark in the
viewfinder also glows when the shutter button is
pressed halfway. @
2.
To test fire the flash, press the ready lamp after
it glows. The flash fires when it is in proper work
ing order.
(4)
• Test fire the flash
before
pressing the shutter button
halfway. This cannot be done after the shutter button
is pressed halfway.
17