Auto internal zoom mechanism • automatic setting, Manual setting – Canon 430 EZ User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Auto Internal Zoom
Mechanism
• Automatic Setting
Turn the main switch on ('i' mark). When the shut
ter button is pressed halfway, the flash head posi
tion automatically adjusts according to the lens
focal length. The position setting and “EBBu)”
appear in the display panel. (J
Manual Setting
To change the flash head position manually, press
the zoom button until the desired setting appears.
@ (D
Each time the zoom button is pressed, the
display changes as shown in the following
figure. (4)
•
• The amount of illumination changes with the head
position. See page 77 for an explanation of the rela
tionship between the illumination range and quantity
• Be careful not to set a flash head position larger than
the lens focal length, or the edges of the picture will
become dark
• When resetting the automatic zoom from the manual
mode, press the zoom button and "BBEfiSI" appears.
23