Multi /0„z m – Canon 430 EZ User Manual
Page 104
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
M 1 / 4 — M 1 / 8 — M 1 / 1 6 — M 1 / 3 2
\
MOM ^
—
0
3.
Press the plus and minus buttons
(+
and
-)
to
set the flash intensity. @ (5)
•The
M1/1
and M1/2 settings cannot be used in
stroboscopic flash.
4.
Press the multi-flash button to set the number of
flashes per second. (6) (7)
5. After the ready lamp turns red, press the shutter
button halfway.
6
.
Use the flash coupling range displayed in the
flash panel for the shooting. (8)
• The yellow-green ready lamp does not light between
6 kHz - 10 kHz.
• This mode is effective when the main subject is highly
reflective and the background is as dark and distant
as possible.
• Due to slow shutter speeds in this mode, use a tripod
to minimize camera shake.
• The Canon Remote Switch 60T3 is recommended for
this mode.
-I Hz —2Hz —3Hz- 8Hz-9Hz-l OHz
J®
M
A Zoom
iV
'/
t o
DC
,Jmm
MULTI /0„z
m
59