Dynojet 250ix: Pit Installation Guide - Manual (Page 49)

I N S T A L L A T I O N
Trike Carriage Adapter Installation
Version 3 In Ground Model 200iPX/250iPX Motorcycle Dynamometer Installation Guide
2-27
I NSTALLING THE C ABLE T RACK
You will need the following parts:
• 134260301 Nut, 4-40, Hex (4)
• 136206141 Screw, 4-40 x 3/8", Flat-Head (4)
• 21200069
Cable Track Mounting Bracket, to Trike Adapter Assembly
• 21626217 Cable Track Mounting Bracket
• 43432150 Cable Track
1 Remove the two 5/16-inch bolts and washers securing the carriage clamp as
shown in Figure 2-19.
2 Secure the cable track mounting bracket to the carriage clamp using the
two 5/16-inch bolts and washers removed earlier.
Figure 2-19: Install the Cable Track Mounting Bracket
PD117
mounting bracket
carriage clamp