Ethernet configuration, Figure 4-4. ethernet settings (wired only) – Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort User Manual
Page 22
Configuration Using Web-Manager
MatchPort b/g™ User Guide
22
Ethernet Configuration
If the Network Mode is Wired Only, in addition to the IP configuration, you must
specify the speed and direction of data transmission.
Figure 4-4. Ethernet Settings (Wired Only)
To specify how data will be transmitted:
1. Enter the following (as necessary):
Auto Negotiate
With this option, the Ethernet port auto-negotiates the speed
and duplex with the hardware endpoint to which it is
connected. This is the default setting.
If this option is not selected, complete the fields that become
available:
Speed: The speed of data transmission. The default setting is
100 Mbps.
Duplex: The direction of data transmission. The default
setting is Full.
2. When you are finished, click the OK button.
3. On the main menu, click Apply Settings.