Using tftp: command line interface, Recovering the firmware using the serial port – Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort User Manual
Page 80
Updating Firmware
MatchPort b/g™ User Guide
80
Using TFTP: Command Line Interface
To download new firmware from a computer, enter the following from a TFTP
command line interface:
tftp –i <ip address> put <local filename> <destination
file name>
The following examples demonstrate the TFTP command sequence to download the
.rom file, the .fwx file, and the .cob file:
tftp –i 192.168.1.111 put mpt_6502.rom W8
tftp –i 192.168.1.111 put gen_mpt_webm_1602.cob WEB1
Recovering the Firmware Using the Serial Port
If for some reason the firmware is damaged, you can recover the firmware file by
using serial port 1 to download the *.ROM file.
Note:
See also Recovering Firmware in the DeviceInstaller User Guide.
1. Start DeviceInstaller.
2. From the Tools menu, select Advanced/Recover Firmware. The Recover
Firmware window displays.
3. Enter the com port on your PC and the location of the firmware file. Make sure
Device Model indicates MatchPort b/g.
4. Click OK to download the file.