Channel 1 and channel 2 configuration, Serial settings, Figure 4-6. hostlist settings – Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort User Manual
Page 25
Configuration Using Web-Manager
MatchPort b/g™ User Guide
25
Figure 4-6. Hostlist Settings
2. Enter or modify the following fields from the Hostlist Settings page:
Retry Settings
Retry Counter
Enter the value for the number of times the MatchPort should
attempt to retry connecting to the host list.
Retry Timeout
Enter the duration (in seconds) the MatchPort should abandon
attempting a connection to the host list.
Host Information
Host Address
Enter or modify the host’s IP address.
Port
Enter the target port number.
Channel 1 and Channel 2 Configuration
Channel 1 and Channel 2 configurations define how the serial ports respond to
network and serial communication
.
Serial Settings
To configure a channel’s serial settings:
1. From the main menu, click Serial Settings for either Channel 1 or Channel 2 to
display the Serial Settings page for the selected channel.