Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort - Manual (Page 36)

Configuration Using Web-Manager
MatchPort b/g™ User Guide
36
WEP Options
Authentication Select an authentication scheme (Open/None or Shared)
from the drop-down list.
Encryption Select the encryption type (64 bits or 128 bits for WEP) from
the drop-down list. 64 bits is the default encryption for WEP.
Key Type Select the key type (Hex or Passphrase).
Key and Retype Key Enter the Encryption Key in hexadecimal value if Hex is
selected as the key type. Enter key as a string if Passphrase
is selected as the key type. Passphrase input is not the same
as ASCII input. A passphrase of more than 20 characters is
recommended for adequate security. Spaces and punctuation
are permitted.
TX Key Select the key to use for transmission.
WPA Options
Authentication Select Pre-Shared Keys from the drop-down list.
Encryption Select the encryption type from the drop-down list. TKIP is the
default encryption for WPA.
Key Type Select the key type (Hex or Passphrase).
Key and Retype Key Enter the Encryption Key in hexadecimal value if the key
type is Hex. Enter key as a string if the key type is
Passphrase. Passphrase input is not the same as ASCII
input. A passphrase of more than 20 characters is
recommended. Spaces and punctuation characters are
permitted.
802.11i/WPA2-Personal Options
Authentication Select Pre-Shared Keys from the drop-down list.
Encryption Select the encryption type from the drop-down list. CCMP is
the default encryption for WPA2.
Key Type Select the key type (Hex or Passphrase).
Key and Retype Key Enter the Encryption Key in hexadecimal value if the key
type is Hex. Enter the key as a string if the key type is
Passphrase. Passphrase input is not the same as ASCII
input. A passphrase of more than 20 characters is
recommended. Spaces and punctuation characters are
permitted.
Advanced Settings
TX Data Rate MatchPort permits the control of the transmission data rate.
Click the Auto fallback check box to allow the MatchPort to
set the data rate automatically (or leave unchecked to set the
transmission rate manually). The default rate is 54 Mbps.
If the Auto fallback check box is selected, choose the
maximum data rate from the drop-down list.
If the Auto fallback check box was not selected, select the
fixed data rate (in Mbps) from the drop-down list.