Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort User Manual
Page 61
Configuration via Serial Mode or Telnet Port
MatchPort b/g™ User Guide
61
The 802.11i/WPA2-Personal mode is compliant with the Robust Secure Network that
is specified in the IEEE standard 802.11i. It enables the AES-based strong CCMP
encryption.
Security suite 0=none, 1=WEP, 2=WPA, 3=WPA2/802.11i
(0) ? _
WEP
Security suite: 0=none, 1=WEP, 2=WPA, 3=WPA2/802.11i (1) ? 1
Authentication: 0=open/none, 1=shared (1) ?
Encryption: 1=WEP64, 2=WEP128 (2) ?
Change Key (N) ? Y
Display key (N) ?
Key type 0=hex, 1=passphrase (0) ?
Enter Key: **-**-**-**-**-**-**-**-**-**-**-**-**
TX Key index (1) ? 1
TX Data rate: 0=fixed, 1=auto fallback (1) ?
Authentication
Select whether the encryption keys are matched (1 =
shared) with those of the communication partner before
passing through messages or not (2 = open/none).
Encryption
Length of the encryption key and the security strength.
WEP64 uses a 40 bits/5 bytes key (option 1). WEP128 uses
a 104 bits/13 bytes key (option 2).
Change key
Select (Y) Yes to modify the currently configured key.
Display Key
Select (Y) Yes to show the currently configured
key/passphrase
Key type
Indicate whether the new key is in hexadecimal or
passphrase format.
Enter key
Enter the new encryption key. The passphrase input is not
the same as ASCII input (as used on some products). ASCII
is translated directly into hexadecimal bytes according to the
ASCII table. The MatchPort passphrase is hashed using the
Neesus Datacom algorithm (for WEP64) or MD5 (for
WEP128).
The passphrase input is safer because it is up to 63 chars
long. ASCII input is a maximum of 5 (WEP64) or 13
(WEP128) characters long and limits the number of key
combinations.
Please refer to the other equipment’s manual to determine
the passphrase input style recommended.
Note:
Lantronix recommends using a passphrase of 20
characters or more for maximum security.
TX Key index
Select the WEP key used for transmissions. Enter a value
from 1 to 4.
TX Data rate
Select the Data Transmit rate. The value are 1 MB, 2 MB,
5.5 MB, 11 MB, 18 MB, 24 MB, 36 MB, and 54 MB.