Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort User Manual
Page 85
Troubleshooting
MatchPort b/g™ User Guide
85
Problem/Message
Reason
Solution
The device server appears to
be set up correctly, but you are
not communicating with your
device attached to the device
server across the network.
If you are sure that the serial
port setting is correct, then you
may not be connecting to the
correct socket of the device
server.
Another possibility is that the
device server is not set up
correctly to make a good
socket connection to the
network.
You can check to see whether there
is a socket connection to or from the
device server by checking the state
of CP1, if it has been configured for
LED1 functionality.
If the state of CP1 is blinking
consistently, or is completely off,
then there is a good socket
connection.
If the state of CP1 is low, use the
Connect Mode option C0 for making
a connection to the device server
from the network. Use Connect
Mode option C1 or C5 for a
connection to the network from the
device server. See the full list of
Connect Mode options in
on page 47.
When connecting to the Web-
Manager within the device
server, the No Connection With
The Device Server message
displays.
Your computer is not able to
connect to port 30718 (77FEh)
on the device server.
Make sure that port 30718 (77FEh)
is not blocked with any router that
you are using on the network. Also,
make sure that port 77FEh is not
disabled within the Security settings
of the device server.