Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort - Manual (Page 34)

Configuration Using Web-Manager
MatchPort b/g™ User Guide
34
Message Properties
Message The subject line of the trigger event email to the specified
recipient(s).
Priority The priority level for the email.
Min. Notification Interval The notification interval is the minimum time allowed between
individual triggers. If a trigger event occurs within the minimum
interval since the last trigger, it is ignored.
Re-notification Interval Indicates the time interval in which a new email message is
sent to the recipient(s) when a single trigger event remains
active.
WLAN Configuration
Without adequate protection, a wireless LAN is susceptible to access by
unauthorized users.
Note: Due to regulations, the country-specific setting has been removed from
the setup menu and Web-Manager. However, we provide a separate utility
for changing the Country/Zone setting. The utility is called SetZone and is
included in the MatchPort package. It is also available for download from the
Lantronix web site.
The syntax is SetZone <IP address> [<zone abbreviation>]
Leaving the zone blank causes the utility to report the current setting only.
Following are valid zone abbreviations. These settings are consistent with
IEEE802.11b/g zones:
US=United States
CA=Canada
FR=France
SP=Spain JP=Japan
OT=Others, such as Europe
(excluding France), Asia,
Africa, and Australia
To configure the MatchPort’s WLAN settings:
1. On the main menu, click WLAN to open the WLAN Settings page.