Mail server, Unit name, Domain name – Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort User Manual
Page 58: Recipients, Figure 5-7. email settings
Advertising
Configuration via Serial Mode or Telnet Port
MatchPort b/g™ User Guide
58
Figure 5-7. Email Settings
Mail Server
Enter the IP address of the mail server. Enter each 3-digit section and press Enter
between sections. The current value displays in parentheses.
Mail Server (0.0.0.0) ? ( 0) _
Unit Name
Enter the username used by the MatchPort to send email messages. The current
value displays in parentheses.
Note:
Do not use spaces in the name.
Unit name () ? _
Domain Name
Enter the email server’s domain name. The current value displays in parentheses.
Domain name () ? _
Recipients
Enter the full email address of up to two trigger email recipients. The current value
displays in parentheses.
Recipient 1 () ? _
Advertising
This manual is related to the following products: