2 initializing the balance – Rice Lake MC Series Mass Comparator, A&D Weighing - MC-6100 User Manual
Page 29
27
8-2 Initializing the Balance
This function returns the following parameters to factory settings.
z
Calibration data
z
Function table
z
The sample unit mass value (counting mode), 100% reference mass value (percent mode)
z
The data that is stored in the balance using the data memory function
z
External calibration weight and target weight value
z
Function switch settings
Note
Be sure to calibrate the balance after initialization.
Operation
1 Press the ON:OFF key to turn off the display.
2 While pressing and holding the PRINT key and the
SAMPLE key, press the ON:OFF key. The balance
displays p5 .
3 Press the SAMPLE key to display Clr .
4 Press the PRINT key.
To cancel this operation, press the CAL key.
5 Press the RE-ZERO key.
6 Press the PRINT key to initialize the balance.
The balance will automatically return to the weighing
mode.
With these keys
held down
Press the key