Rice Lake MC Series Mass Comparator, A&D Weighing - MC-6100 - Manual (Page 37)

35
Interval memory mode
The weighing data is periodically stored in memory.
Required setting dout prt 3 Interval memory mode
dout data 2 Data memory function is used.
Stores weighing data.
dout int Interval time
Optional setting dout 5-td1, 2, or 3 Adds the time and date.
Example “For periodical weighing without a computer command and
outputting all of the data to a computer at one time”
9-6 Description of the Item “Data format”
A&D standard format 5if type 0
This format is used when the peripheral equipment can receive the A&D format. If an AD-8121B is
used, set the printer to MODE 1 or 2.
z This format consists of fifteen or sixteen characters excluding the terminator.
With the MC-1000, when the numerical data excluding the decimal point exceeds eight
characters, the data format will be sixteen characters long.
z A header of two characters indicates the balance condition.
z The polarity sign is placed before the data with the leading zeros. If the data is zero, the plus sign is used.
z The unit, consisting of three characters, follows the data.
(Data example exceeding 8 characters)
DP (Dump print) format 5if type 1
This format is used when the peripheral equipment can not receive the A&D format. If an AD-8121B
is used, set the printer to MODE 3.
z This format consists of sixteen characters excluding the terminator.
z A header of two characters indicates the balance condition. No overload header is used.
z The polarity sign is placed before the data, with spaces in place of leading zeros, if the data is
not zero or overloaded.
z The unit, consisting of three characters, follows the data.
W T + 1 0 0 0 . 0 0 0 0
Terminator
CR LF
Header Data Unit
Unit Data Header
S T , + 0 0 0 . 0 1 2 7 8 8 g CR LF
Terminator
Unit Data Header
S T , + 1 0 0 0 . 0 0 0 0 8 8 g CR LF
Terminator