Rice Lake TradeRoute HL Series - Low Profile Operators Manual for Models from 2011 and Older 127465 - Manual (Page 11)

8
Operating Modes
The Weigh Center operates in two modes: Single weigh mode
and Batch weigh mode.
Single Weigh Mode is a simple mode that allows only independent
scale weight tickets. Product ID’s are not available in this mode.
Batch Weigh Mode is a mode with more functionality. It allows
the use of product ID’s so that more than one product can be
delivered and weighed (multiple compartment containers).
To change the mode, enter the following keystrokes into the
M2000:
The M2000 will then prompt ‘config’ on the display. To function
in single weigh mode enter the following keystrokes:
To function in batch weigh mode enter the following keystrokes: