Rice Lake TradeRoute HL Series - Low Profile Operators Manual for Models from 2011 and Older 127465 - Manual (Page 33)

30
15. Insert roll pin (17) through the lower load cell pin (34) to
prevent the load cell assembly from jumping off the pin with
roll pin punch and hammer.
16. Insert retaining ring (3) on lower cylinder pin.
17. Assemble hydraulic fittings (55,56,57) if required with 11/16”
and 5/8” wrenches.
18. Attach load cell cover (37 or 44) with 1oad cell cover bolts
(20) and lock washers (21) with 7/16” wrench