Rice Lake TradeRoute HL Series - Low Profile Operators Manual for Models from 2011 and Older 127465 User Manual
Page 16
Advertising
13
10. Lower the platform to disengage the scale, visually check to
see that the scale is down completely. The cab alarm light will
go out when the scale is in the transport position.
Note
1
: Do not move the vehicle until the scale is in the
transport position.
Note
2
: NET and GROSS modes are automatically selected
during operation.
Note
3
: It is not necessary to turn the power switch on the
control box off between deliveries. In fact, if the truck will not
be turned off between deliveries it is recommended that the
power switch be left in the on position. When the truck is
going to be shut down, power down the control box prior to
turning off the truck.
Advertising