Yamaha CDR-HD1500 - Manual (Page 37)

RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
■ Recording input audio source
You can make recordings from the component such as a cable TV tuner or DVD player connected to this unit.
This unil cannot input digittil signals other than PCM signals.
Memo
Recording onto the HDD is made in the unit called ‘‘disc". The maximum length of one disc on the HDD is 179 minutes .59 seconds. If the
recording has been made exceeding the maximum length, the recording will be made continuously to the next available disc.
[>/tll!
ii.'ctr;:
is_ryi.
" ;= ;■ ■ ■■■; =
n f? • . . f'.
: ":o.-. 0-. ^'p ■ 0.
REC INPUT n
r-r;
YAMAHA
O
O
Zl
m
O
O
30
g
o
-►/II
1. Press REC while the HDD is selected (P.14).
The HDD mark hashes, tind the disc and track numbers to be
recorded are itidicated oti the display. Recording has not been
started yet at this stage. (HDD recording siandby mode)
5. start playing the source.
t 1 ! I .'! I .'!
Ll
I I .'! I .'! I' S' B' ! I' 8
Disc number to be
recorded
Track number to be recorded
Memo
• In the HDD recording standby mode, you can specify the
settings for HDD recording. For details, refer to ‘•Setting the
HDD recording mode" (P.35).
• You can specity a disc to where data is copied. For details,
refer to “Selecting a target disc” (P.28). (Wheti no disc is
specified, the unit automatically selects the smallest disc
number that does not contain tiny data.)
2> Select the input source to be recorded.
The lamp for the selected input (OPTICAL. COAXIAL, or
ANALOG) lights.
3i Adjust the recording level.
The adjustment of the digital recording level is not normally
necessary. However it is possible to adjust the recording level
(P.34) to suit your needs.
4.
Press >/nci to start recording.
Press t>/nn to stop recording temporarily. The HDD mark
flashes and the track number is advanced to the next.
Press i>/no to resume recording.
Memo
This unit automatically adds track markers to track data wfiile
recording exleriial audio sources. To add track markers
manually, refer to “Adding triick markers during recording
(Manual track marking)“ (P.37).
6a Press □ to stop recording.
The first track number of the disc at which recording has been
stopped is intliciited on the display.
Z'~-! 1 .■ B' 8 !■ I
IMPORTANT
• Never turn oil the power of this unit during recording.
Recording may not be correctly made, or the data on the HDD
miiy be damaged.
• During recording, make sure that this unit is not subjected to
shock or vibration as the HDD may be damaged.
B S I .'B B .'8 B .'S' B .'B I
B' 8' B' ! I
31