Using an external timer to record, Notes on recording time setting, Recording time – Yamaha CDR-HD1500 User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD

Using an external timer to record

Notes on recording time setting

This unit is not equipped with the clock function. Use an external timer when making a timer recording.

It may take 30 seconds to 1 miiuite after the power of this unit is turned on by an external timer until an actual recording starts. (This length

of lime is subject to change depending on the condition.) During this time, no recording is made. Therefore set the time that is 2-miniite
earlier than the starting time of the program to be recorded for turning on this unit.

As a characteristic of an HDD recorder, it is necessary to store information to control audio data as well ¿is audio data itself. This inlbrma-

lion is noriually recorded when recording is stopped. Therefore if the power of this unit is turned off before recording is slopped, no
information to control audio data and no audio data are stored. Set the time that is longer than 3-minnte after the program to be recorded
finishes for turning off this unit by an external timer.

Set the lime that is 2-minnle longer than actual recording time for the total recording time.

Following chart indicates the time flow when this unit lUiikes timer recordings.

Time to be set on the external timer

f

Externa! timer turns on

(2 minutes + recording time + 3 minutes or longer)

Recording time to be set on the CDR-HD1500

(Recording time + 2 minutes)

Recording time

Program starting time

Program ending time

1

Externai timer turns off

CDR-HD1SOO starts recording

(30 seconds to 1 minute after the

external timer turns on.)

CDR-HD1500 finishes
recording

Time flow

* •

Example: To record the program that starts at 9:00 and ends at 10:00.

• Set the external timer to be turned on at X:,58.

* Set the exiernal timer lo be turned off at'ler 10:03.

* Set 1 hour 2 minutes for lire total recording time on this unit.

: MemO:

• Actual recorded material includes a little more than the set amount of time at both beginning and end of the recording. Delete unnecessary

parts using the editing operation.

• Recording will be stopped if copy protected digital signals are input while timer recording is being made.

* If you set the total recording lime over 179 minutes 59 seconds, recording wall be made extending several discs. To play the recorded

materials sequentially, select "Style AH” as the play style (P.20).

32

Advertising