Yamaha CDR-HD1500 - Manual (Page 49)

COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
■ Setting the CDR copy menu
In the CDR copy menu, you can set the copy nielhod. copy level,
copy speed, and imaging speed.
Copy Method
MULTI JOG MENU
1=1
c 3 ■ ■ ■ C-I
rp-,;p: 'sg.-rA" .O' ■..
ro...................... r~^------------- 1
........................ . .................................... . • . • • • .......................................... ......
.........................................-.Ó.-.-p.-.p. -:Q. ■.'O'. :
■MENU
■ ENTER
1
• Press MENU while this unit is in the CDR copy
standby mode (P.38, 40).
2>
in the HDD copy menu, you can set the copy method,
copy ievei, copy speed, and imaging speed.
The copying menu (R43-44) contains four items as follows:
• Copy Method
• Copy Level
• Copy Speed
• Imaging Speed
3i Press the MULTi JOG knob (ENTER on the remote
controi) to confirm the menu item to be adjusted.
4.
Rotate the MULTi JOG knob (press
+/-,
or ▼ on the
remote controi) to adjust the parameter for each item.
5>
Press the MULTi JOG knob (ENTER on the remote
controi) to confirm the setting when adjustment has
been compieted.
6- Press MENU to ciose the menu.
This unit returns to the CDR copy stiindby mode (R.f 8.40).
Setting of the copying method. Copying may fail if the setting for
■‘Copy Method” is not correctly made.
Initial setting: Analog Copy
Analog Copy
This method always makes analog copies.
Digital Move
The data is moved from the HDD to the CD. Therefore, the track or
group data will be deleted from the HDD after they have been
moved to the CD-R or CD-RW disc by this method.
Digital Copy
This method always makes digital copies. Copying is not possible if
the tracks are copy protected by the SCMS standard (P.82).
Auto Dig/Anig
Digital and analog copying are tuilomatically switched depending
on the trtick. If digital copy ing is prohibited by the .SCMS standard
(P.82), an tinalog copy is made. For those tracks that can be
digitally copied, a digital copy is made.
Memo:
• In analog copying, the data may be copied at a lower sound level.
• The settings is stored in the memory and applied to future
copying,
• When copy level Is adjusted or when carrying out Analog Copy,
the unit automatically creates an image file on the HDD before
starling the disc copy process.
O
0
1
I
D
O
O
TJ
<
z
o
43