Yamaha CDR-HD1500 - Manual (Page 46)

COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
■ Copying selected tracks on the HDD
You can copy favorite tracks on the HDD to a CD-R or CD-RW disc
1 . Set a new or not finalized CD-R (or CD-RW) disc in
the disc tray, then select the HDD and add book­
marks to favorite tracks (P.24).
Tracks are listed and stored in order that the bookmarks have
been placed
2.
Press COPY twice.
This unit enters the CDR copy standby mode. Copying has not
been started yet at this stage.
Memo
In the C’DR copy standby mode, you can specify the settings
for disc copy.
For details, refer to "Setting the CDR copy
mode” (P.42) and "Setting the CDR copy menu" (P.43).
3.
Rotate the MULTI JOG knob (press +/-, GROUP SKIP
buttons, or ▼ on the remote control) to select
“Mrk”.
Memo
You can create a CD with high quality sounds using the Audio
Master Quality Recording feature. For details, refer to
"Copying high quality
bouik I b (Audio Master Quality
Recording)" (P.41).
D I .'! I
O' !' I’ ! I
4.
Press >/nD to start copying
The progress of the copy process is shown in the display.
IVi fl.". I.'i 1 DS!.. i l.'l'l.'l 1 ^ REC
[ J 1 t fl I'., J_ fl" fl'^ i' 1 ^
Memo
The OPC (Optinuim Power Control) feature may start
automatically dependiitg on disc conditions. In this case, the
message “OPC Adjust” appears on
the display until the
adjustment is done (about 10 seconds) before the copy process
starts.
CD TEXT is copied only when selecting "Full Aulo” in the
CDR copy mode for a new CD-R or CD-RW disc.
I fl"" I . fl fl I fl fl fl fl ! '"!
When copying has been completed, the operation of
the HDD and the CD automatically stops.
5a To carry out the finalization process (P.47), press
FINALIZE.
40