Connecting speakers, Caution, Note – Yamaha HTR-6080 User Manual
Page 17: 13 en
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Connecting speakers
Be sure to connect the left channel (L), right channel (R),
this unit cannot reproduce the input sources accurately.
f” (red) and (black) properly. If the connections are faulty,
Caution
• Before connecting the speakers, make sure that this unit is turned off (see page 25).
• Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage
this unit and/or the speakers. If the speaker wares are short-circuited, “CHECK SP WIRES” appears in the front
panel display when you turn on this unit.
• Use the magnetically shielded speakers. If this type of speaker still creates interference with the monitor, place the
speakers away from the monitor.
• If you are to use 6 ohm speakers, be sure to set “SP IMP.” to “6Q MIN” before using this unit (see page 25). 4 ohm
speakers can be also used as the front speakers (see page 91).
Note
A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps %'ith a stripe,
groove or ridge. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of this unit and your speaker. Connect the plain cable
to the (black) terminals.
13 En