Yamaha HTR-6080 - Manual (Page 62)

Using iPod^
Once you have stationed your iPod in a Yamaha iPod universal dock (such as the YDS-10, sold separately) connected to
the DOCK terminal of this unit (see page 23), you can enjoy playback of your iPod using the supplied remote control.
You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression
artifacts (such as the MP3 format) stored on your iPod (see page 46).
Notes
• Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.
• Sonte features may not he compatible depending on the model or the software version of your iPod.
si'c
■ For a complete list of the remote control functions used to control your iPod, sec the "iPod" column in "Controlling other
components" on page 87.
• For a complete list of status messages that appear in the front panel display and in the OSD, see the "iPod” section in
‘Trouhleshooting" on page 99.
• Once the connection between your iPod and this unit is complete, "iPod connected" appears in the front panel display and the DOCK
indicator lights up in the front panel dispkiy.
• Only the analog audio and video signals of your iPod are input at the DOCK terminal, and the analog audio signals can be output at the
analog AUDIO OUT (REC) jacks for recording.
■ Your iPod biittery is automatically charged when your iPod is stationed in a Yamtiha iPod universal dock connected to the DOCK
terminal of this unit as long as this unit is turned on. You can also select whether this unit charges the battery of the stationed iPod or
not when this unit is in the standby mode by selecting the "STANDBY CHARGE” parameter in "OPTION MENU” (sec page 84). The
DOCK indicator turns on while this unit charges the battery of the connected iPod when this unit is in the standby mode.
Controlling iPod
You can control your iPod when “V-AUX” is selected as
the input source. The operations of your iPod can be done
with the aid of the OSD of this unit (menu browse mode)
or without it (simple remote mode).
■ Controlling iPod in the simple remote
mode
You can perform the basic operations of your iPod (play,
stop, skip, etc.) using the supplied remote control without
the aid of the OSD of this unit.
You ciin view the photos or video clips stored on your iPod.
Operalion.s can be iilso done with the controls on your iPod.
■ Controlling iPod in the menu browse
mode
You can perform the advanced operations of your iPod
using the supplied remote control with the aid of the OSD
of this unit. You can browse the songs stored on your iPod
in the OSD. Further, you can change or adjust settings for
your iPod to suit your personal preferences.
fiji'
• The rtame of the song being played also appears in the front
panel display according to the "FL SCROLL” parameter in
"OPTION MENU” (see page 82).
■ You can select the amount of time the iPod menu and play
information is displayed in the OSD by using the "OSD-
SOURCE” in "OPTION MENU” (see page 82).
Notes
■ Operations cannot be done with the controls on your iPod.
■ The YAMAHA logo appears in the display window' of your
iPod.
• There are some characters that cannot be displayed in the front
panel display or in the OSD of this unit. Those chanicters are
replaced w'ith underscores
• The “Settings” parameters can be changed or adjusted only in
the OSD. Press ©ENTER on the remote control to toggle
between the "Settings" parameter settings.
■ You cannot browse the photos or video clips stored on your
iPod in the OSD. Use the simple remote mode to enjoy
watching the photos or video clips stored on your iPod.
58
En