Sound field programs, Selecting sound field programs, Notes – Yamaha HTR-6080 User Manual

Page 46: Sound field program descriptions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Sound field programs

This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or niulti-channel sound source. This unit is also equipped with a Yamaha digital sound field processing

(DSP) chip containing several sound field programs which you can use to enhance your playback experience.

• The Yamaha HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in

tictual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the renections coming from
the front, back, left and right.

Iiaianu

Selecting sound field programs

Rotate the ©PROGRAM selector (or set the

operation mode selector to ® AMP and then

press one of the sound field selector buttons (®)
repeatedly).

The name of the selected sound field program appears in
the front panel display and in the OSD.

Notes

' Sound field programs cannot be selected when the component

connected to the MULTI CH INPUTjacks is selected as the

input source (see page 38).

' When you play back Dl'S 96/24 sources with any sound field

program, this unit applies the selected program without
activating the D'fS 96/24 decoder.

' Sampling frequencies higher than 48 kHz are sampled down to

48 kHz or lower and then sound field programs are applied.

' When the sampling frequency of the input sources arc higher

than 96 kHz, this unit does not apply any sound field programs.

■ When you select an input source, this unit automatically selects

the last sound field program used with the corresponding input

source.

Sound field program descriptions

z'ti!-.
Select a sound field program based on your listening preference, not merely on the name of the program, etc.

CINEMA DSP

Remote control

Category of the Name of the Created sound

or

button

program

program

fields

HiFi DSP

©

C O J

Ttii;, program clearly reprodueer (he tinelyr eiaboraLed sautid design of the latest sedetjee riedttn and speeia] eiieets-ieatunng nntvies.

You cat! enjoy a variety oi cineniatographjcally crettied virtual spaces reprttduced with dear separation between dialog, stmnd elTeoLs and
baekgrOLitid nrusic.

DSP LEVEL
P.INIT. DLY

P.ROOM SIZE

S.ÌNIT. DLY

S. ROOM SIZE
SB INI. DLY

SB ROOM SIZE

DIALG. LIFT

Available sound field parameters (see page 63)

Program description

Sound field indicators

Surround left
sound field

Presence sound field

. Listening position

c o >

Surround right
sound field

Surround back sound field

42

En

Advertising