Connecting audio components, Notes – Yamaha HTR-6080 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
■
Connecting audio components
Notes
■ To make a digital connection to a component other than the default component assigned to each the DIGITAL INPUT jack or the
DIGITAL OUTPUT jack, select the corresponding setting for -‘OPTICAL OUT’, '‘OPTICAL IN”, or -‘COAXIAL IN” in '‘I/O
ASSlGNMeNT” (see page 78).
■ Connect your turntable to the GND terminal of this unit to reduce noise in the signal. However, you may hear less noise without the
connection to the GND termintil for some turntables.
■ The PHONO jacks are only compatible with a turntable with an MM or a high-output MC cartridge. To connect a turntable with a low-
output MC cartridge to the PHONO jacks, use an in-line boosting transformer or an MC-head amplifier.
■ When you connect both the DIGITAL INPUT (OPTICAL) jack and the DIGITAL INPUT (COAXIAL) jack to an audio component,
the priority is given to the DIGITAL INPUT (COAXIAL) jack.
Optica] out
indicates recommended connections
indicates alternative connections
21
En