Yamaha HTR-6080 - Manual (Page 78)

Customizing this unit (MANUAL SETUP)
LFE/Bass out LJ-liE-'-lEifiSis OUT
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
Choices: SWFR. FRNT. BOTH
Subwoofer phase iEiJEiWOOF'EER F-IHQiEli
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices:
NORMAL. REVERSE
' SCiUNDMLtNLI
L.FE.”'E!nbb OUT
§ 1 g g 1
1 S
fm
TIFF i^PM“ El'“H
When a subwoofer is connected to this unit
and you want to get natural bass sound
Select “SWFR” (subwoofer). The LFE signals as well
as the low-frequency signals of other speakers set to
“SML” (or “SMALL”) are directed to the subwoofer.
When a subwoofer is connected to this unit
and you want to get rich bass sound
Select “BOTH” (both). The low-frequency signals of
any source are output from the subwoofer. The LFE
signals as well as the low-frequency signals of other
speakers set to “SML” (or “SMALL”) are directed to
the subwoofer. The low-frequency signals of the front
left and right channels are directed to the front left and
right speakers and the subw'oofer regardless of the
“FRONT SP” setting.
When you do not use a subwoofer
Select “FRNT” (front). The LFE signals, the
low-frequency signals of the front left and right
channels, and the low-frequency signals of other
speakers set to “SML” (or “SMALL”) are all directed
to the front left and right speakers regardless of the
“FRONT SP” setting.
Bass crossover iEiffiEkEltiOUIEi?
Use this feature to select the crossover frequency of all the
speakers set to “SML” (or “SMALL”) or to “NONE” in
“SPEAKER SET” (see page 73). All frequencies below
the selected frequency will be sent to the subwoofer or to
the speakers set to “ERG” (or “LARGE”) in “SPEAKER
SET” (see page 73).
Choices: 4()Hz, 60Hz, 80Hz, 90Hz, lOOHz, 1 lOHz,
120Hz, 160Hz, 2()0Hz
• Select “NORMAL” if you do not want to reverse the
phase of your subwoofer.
• Select reverse the phase of your
subwoofer.
■ Speaker level l3>;5Fi:E!jhil:ER LEEUEi...
Use this feature to manually adjust the output level of each
speaker.
Control range: ^10.0 to 10.0 dB
Control step: 0.5 dB
Initial setting: 0.0 dB
SPEAKER LEVEL Adjusted speaker
F t ... Front ielT speaker
RE Front right speaker
C' Center speaker
:5li.iFR Subwoofer
:5i... Surround left speaker
;5F! Surround right speaker
:5FiR Surround back right speaker
iEFil. Surround back lel’t speaker
FT... Presence left speaker
i-TE Presence right speaker
Notes
■ The avaikible speaker channels differ depending on the setting
of the speakers.
■ Instead of “SBL” and “SBR”, “SB” is displayed if “SUR.B L/R
SP” is set to either “SMLxl” or “LRG. k I" (.see page 73).
74
En