Press ©straight (or ©straight) to select “straight, Deactivating the “straight” mode – Yamaha HTR-6080 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sound field programs
Before performing the following operation, set the operation
mode selector on the remote control to ®AMP.
Enjoying unprocessed input
sources (Straight decoding mode)
When this unit is in the “S TRAIGHI” mode, 2-channel
stereo sources are output from only the front left and right
speakers. Multi-channel
sources
are decoded straight
into
the appropriate channels without any additional effect
processing.
Press ©STRAIGHT (or ©STRAIGHT) to select
“STRAIGHT”.
■ Deactivating the “STRAIGHT” mode
Press ©STRAIGHT (or ©STRAIGHT) so that
“STRAIGHT” disappears from the front panel
display.
The sound effect is turned back on.
47
En