Connecting other components, Connecting a dvd player – Yamaha HTR-6080 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Connecting other components
Make sure that this unit and other
components are unplugged from the
AC wall outlets.
Notes
• When "VIDEO CONV.’" is set to "OFF” (see page 82), be sure
to make the same type of video connections as those made for
your TV (see page 18). For example, if you connected your TV
to the VIDEO MONITOR OUT jack of this unit, connect your
other components to the VIDEO jacks.
■ Connecting a DVD player
■
When "VIDEO CONV/’ is set to "ON’' (see page 82), the
converted video signals are output only at the MONITOR OUT
jacks. To record a source, make the same type of video
connections between each component.
■
To make a digital connection to a component other than the
default component tissigned to each DIGITAL INPUT or
DIGITAL OUTPUT jack, select the corresponding setting for
"OPTICAL OUT, "OPTICAL IN", or "COAXIAL IN" in "I/O
ASSIGNMENT (see page 78).
■ If yo'Li connect your DVD player to both the DIGITAL INPUT
(OPTICAL) and the DIGITAL INPUT (COAXIAL) Jacks,
priority is given to the signals input at the DIGITAL INPUT
(COAXIAL) jack.
Coaxial out
DVD player
S-video out
indicates recommended connections
. - indicates alternative connections
19 En