Selecting audio input jacks (audio select), Press ©audio select (or ©audio sel), 1 turn on the video monitor connected to this unit – Yamaha HTR-6080 User Manual
Page 43: Note, Nóte, Ifl==sielji rutoi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playback
Selecting audio input jacks
(AUDIO SELECT)
This unit comes with a variety of input Jacks. Use this
feature (audio input jack select) to switch between input
jacks when more than one input jack is assigned to the
same input source.
• We recommend that you set the audio input jack select to
‘'AUTO” in most cases.
• You can adjust the default audio input jack select of this unit by
using "AUDIO SELECT in "OPTION MENU” (see page 83).
Press ©AUDIO SELECT (or ©AUDIO SEL)
repeatedly to select the desired audio input jack
select setting.
Available input sources
1
»IKBL,
ME.
ifl==SIELJi RUTOi
...............................................
Currently selected audio input Jack select setting
!"iU 1 U
Aulomalical]y selects input signals in the
following order: (i) HDMI (2) Digital
signals (3) Analog signals.
Selects only flDMI signals. When HDM!
signals are not input, no sound is output.
Automatically selects input signals in the
following order: (1) Digital signals input
at the COAXIAL jack. (2) Digital signals
input at the OPTICAL jack. When no
signals are input, no sound is output.
Selects only analog signals. If no analog
signals are input, no sound is output.
Displaying the current status of
this unit on a video monitor
You can display the operating information of this unit on a
video monitor.
1
Turn on the video monitor connected to this
unit.
2
Set the operation mode selector to ® AMP
and then press ©DISPLAY on the remote
control.
The current status screen appears in the OSD.
You can select the amount of time that the current status is
displayed in the OSD by using the "OSD-AMP” parameter
in "OPTION MENU” (.see page 82).
Note
The OSD signal is not output at the VIDEO output jacks and
will not be recorded.
Nóte
This feature is not available when no digital input jacks
(OPTICAL, COAXIAL and HDMJ) are assigned. In addition,
HDMI is not available as an audio input jack select setting when
the HDMI IN 1 and HDMI IN 2 jacks are not used. Use "I/O
ASSIGNMENT” in "INPUT MENU” to reassign the respective
input jack (see page 78).
39
En