Yamaha HTR-6080 - Manual (Page 60)

XM Satellite Radio tuning
Before performing the following operation;^, isct the operation
mode selector on the remote control to ©SOURCE.
Setting the XM Satellite Radio
preset channels
You can use this feature to store up to 40 XM Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in “Preset Search mode"
on page 55.
1
Search for a channel you want to set as a
preset channel by using one of the XM
Satellite Radio search modes.
See “Basic XM Satellite Radio operations” on
page 54 for details.
Currently selected channel number
Press ©MEMORY (or ©XM MEMORY).
The MEMORY indicator flashes in the front panel
display for approximately 10 seconds.
- MEMORY .......
Flashes
Note
You must proceed to and carry out steps 3 through 5 while
the MEMORY indicator is flashing in the front panel
display.
Press ©CATEGORY (or ©A-E/CAT. <1 / >)
repeatedly to select a preset channel group
(A to E) while the MEMORY indicator is
flashing.
The preset channel group letter appears in the front
panel display.
Flashes
Currently selected preset channel group
Press ©PRESET/TUNING/CH </>
(or ©PRESET/CH
A
/
V)
repeatedly to select
a preset channel number (1 to 8) while the
MEMORY indicator is flashing.
The preset channel number appears in the front panel
display.
Flashes
Currently selected preset channel number
Press ©MEMORY (or ©XM MEMORY) to
set the selected XM Satellite Radio channel
as a preset channel while the MEMORY
indicator is flashing.
A colon (:) appears next to the preset channel number
for confirmation, and the .MEMORY indicator turns
off in the front panel display.
Colon {:)
; :.«Sr •. i
Note
Once you i^el a new preset ehanneL the one previously
stored in the same preset channel group and nuntber is
cleared.
56
En