Yamaha HTR-6080 - Manual (Page 54)

FM/AM tuning
There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and
there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use
the automatic and manual preset tuning features to store up to 40 stations (A 1 to E8: 8 preset station numbers in each of
the 5 preset station groups). Furthermore, you can recall any preset stations and exchange the assignment of two preset
stations with each other.
Note
Orient the connected FM and AM antennas for the best reception.
Automatic tuning
Automatic tuning is effective when station signals are
strong and there is no interference.
1
Rotate the ©INPUT selector on the front
panel to select “TUNER” as the input source.
2
Press
(D
FM/AM to select the reception band.
“F.VI” or “A.\i” appears in the front panel display.
3
Press ©TUNING AUTO/MAN’L so that the
AUTO indicator lights up in the front panel
display.
Lights up
No colon (:)
If a colon {:) appears in the front panel display, tuning
is not possible. Press © PRESET/TUNING to turn
the colon (:) off
Press ©PRESET/TUNING/CH <1 /t> once
to begin automatic tuning.
When this unit is tuned into a station, the TUNED
indicator lights up and the frequency of the received
station is shown in the front panel display.
• Press ®t> to tune into a higher frequency.
• Press ®<] to tune into a lower frequency.
Manuai tuning
If the signal received from the station you want to select is
weak, tune into it manually.
Note
Manually timing into an FM station automatically switches the
tuner to monaural reception to increase the signal quality.
1
Rotate the ©INPUT selector on the front
panel to select “TUNER” as the input source.
2
Press ® FM/AM to select the reception band.
“F.M” or “AM” appears in the front panel display.
3
Press ©TUNING AUTO/MAN’L so that the
AUTO indicator disappears from the front
panel display.
No colon {:)
If a colon (:) appears in the front panel display, tuning
is not possible. Press ® PRESET/TUNING to turn
the colon (:) off.
Press®PRESET/TUNING/CH <]/>to
tune into the desired station manually.
Hold down the buuon to continue searching.
50
En