Audio and video signai flow, Audio signal flow, Notes – Yamaha HTR-6080 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Audio and video signai flow
■ Audio signal flow
Notes
■ 2-channel as well as mulli-channel PCM, Dolby Digital and
DTS signals input at the HDMI IN 1 or HDMI IN 2 jack can be
output at the HDMI OLJTjack only when "SUPPORT AUDIO”
is set to "OTHER” (see page 77).
• Audio signtds input at the HDMI IN jacks are not output at the
AUDIO output and DIGITAL OUTPUT jacks.
Video signal flow
Notes
■ When the analog video iignals are input at the COMPONENT
VIDEO, S VIDEO and VIDEO jacks, the priority order of the
input signals is as follows;
1. COMPONENT VIDEO
2. S VIDEO
3. VIDEO
■ Digital video signals input at the HDMI IN I or HDMI IN 2
jack cannot be output from analog video output jacks.
• The analog component video signals with
480i (NTSC)/576i (PAL) of resolution are converted to the
S-video or composite video signals and output at the S VIDEO
MONITOR OUT and VIDEO MONITOR OUT jacks.
■ This unit does not accept analog cttmponent video signals with
lOSOp of resolution.
• The OSD signal is not output at the VCR OUT and DVR OUT
jacks and is not recorded.
• Use the ^‘HDMI UP-SCALING" parameter in ’‘DISPLAY SET"
to deinterlace and convert the resolution of the video signals
output at the HDMI OUT jack ( sec page 81).
17 En