Using set menu, Using .set menu i – Yamaha HTR-6080 User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Customizing this unit (MANUAL SETUP)
Using SET MENU
Use the remote control to access and adjust each
parameter.
■ You can change the "SET MENU" parameters while this unit is
reproducing sound.
■ Press
©RETURN
to return to the prev ious menu level.
1
Set the operation mode selector to ®AMP
and then press ®SET MENU to enter “SET
MENU”.
The top ^^SET MENU’' dtspkty appears in the OSD.
SIET KEHLI
»fillTO SETUP
41flNUr-JL SETUP'
^SISHPL INFO
CA]./[T]sUp.-"Down
[ENTER]sEnter
2
Press
®A / V
to select “MANUAL SETUP”
and then ©ENTER to enter “MANUAL
SETUP”.
The ‘TMANUAL SETUP” display appears in the
OSD.
1 SCiUl-C:' MEI-iU
2 IHF'LIT MENU
3 OPTION MENU
[.ik].--'LT]iUp/DuiWI'
[ENTERIC Enter
3
Press /
V
repeatedly and then press
©ENTER to select and enter the desired
menu.
The following displays are examples where “SOUND
MENU" is selected.
MHNiJRL. SETUP
4, .„'UiJHL' I Id HU
4. •• .i.
l-l>SPERKER SET
B)SPEAKER LEUEL
C:>SP DiSTRNCE
D>EOUf-lL.IZER
E)L,FE LEUEL
[ENT£R]i Enter
r'lPlHUfiL SETUP
1 SOUND MENU
FtDVHRl'tlC RRNGE
6)AUDI 0 SEl
SET
DENTD SLIP!.
C,.k]/[¥]!UF'-"D.:iwn
[EHTER]:Enter
4
Press ©A / V repeatedly and then press
©ENTER to select and enter the desired
submenu.
The following display is an example where “LFE
LEVEL" is selected.
i SOLIi'ID MENU
E)LFE LEU EL
bKLHKhK“ "
HERDPHOKE
------OdB
- - OdB
dJuSit.
5
Press
©A
/
V
to select the desired parameter
and then ©o / !> to change the parameter
settings.
6
Press ©SET MENU to exit from “SET
MENU”.
71
En