Reception conditions, Reception data, 1. channel information (channel voice message) – Yamaha FX900 User Manual
Page 163: Reception conditions 4. reception data
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. RECEPTION CONDITIONS
4. RECEPTION DATA
4-1. Channel Information (Channel Voice
Message)
(1)NOTE ON
This message is received on the MIDI channel specified in
the currently selected BANK when CONTROLLER 1,2, 3 or
4 is assigned to KEY NOTE or KEY VEL. When a NOTE ON
message is received, the value of the assigned effect
parameter is changed according to the received note
number, velocity value.
STATUS
1 0 0 1 n n n n (9nH)
NOTE NO.
0 k k k k k k k
VELOCITY
0
V V V V V V
V
n = 0 (channel #1) —
n = 15 (channel #16)
k = 0-127
v = 1-127,0 (OFF)
(2) NOTE OFF
The NOTE OFF message does not affect operation of the
FX900, but receive capability has been included to provide
compatibility with transmitting devices that send a NOTE
OFF to mark the end of a NOTE ON message.
STATUS
1 0 0 0 n n n n (9nH)
NOTENO,
0 k k k k k k k
VELOCITY
0
V V V V V V
V
n = 0 (channel #1) —
n-15 (channel #16)
k = same as NOTE ON
V = same as NOTE ON
(3) CONTROL CHANGE
This message is received on the MIDI channel specified in
the currently selected BANK when CONTROLLER 1, 2, 3, or
4 is assigned to a control number between 0 and 95. When a
CONTROL CHANGE message is received, the value of the
assigned effect parameter is changed according to the
received control value.
STATUS
1 0 1 1 n n n n (BnH)
n = 0 (channel#!) —
n=15 (channel #16)
CTLNO.
O c c c c c c c
c = 1 -31,64-95
CTL VALUE
O v v v v v v v
V
= 0-127
(4) PROGRAM CHANGE
This message is received on the MIDI channel specified in
the currently selected BANK. When a PROGRAM CHANGE
message is received, the effect program assigned to the
received program number in the program change assignment
table of the current BANK is selected.
STATUS
1 1 0 0 n n n n (CnH) n = 0 (channel #1) —
n=l5 (channel #16)
PGM NO,
O p p p p p p p
p = 0(PGM1=) —
127 (PGM = 128)
(5) CHANNEL PRESSURE
This message is received on the MIDI channel specified in
the currently selected BANK when CONTROLLER 1,2, 3, or
4 is assigned to CH PRESSURE. When a CHANNEL
PRESSURE message is received, the value of the assigned
effect parameter is changed according to the received
pressure value.
STATUS
1 1 0 1 n n n n (DnH) n = 0 (channel#!) —
n= 15 (channel #16)
PRESSURE
O v v v v v v v
v = 0 —127
162